Technical Specifications

Product Name:
FROTH-PAK™ 650 AF HFC CLASS A ISO Spray
Polyurethane Foam
Issue Date:
03/11/2014
Page
9 of 12
Rate Constant
Atmospheric Half
-
life
Method
6.20E-15 cm3/s 1,700 d Estimated.
Theoretical Oxygen Demand: 0.47 mg/mg
Bioaccumulative potential
Data for Component: Diphenylmethane Diisocyanate, isomers and homologues
Bioaccumulation: Bioconcentration potential is low (BCF < 100 or Log Pow < 3).
In the aquatic and terrestrial environment, movement is expected to be limited by its reaction
with water forming predominantly insoluble polyureas.
Bioconcentration Factor (BCF): Bioconcentration potential is low (BCF < 100 or Log Pow <
3). 92; Cyprinus carpio (Carp)
Data for Component: 4,4’ -Methylenediphenyl diisocyanate
Bioaccumulation: Bioconcentration potential is low (BCF < 100 or Log Pow < 3).
In the aquatic and terrestrial environment, movement is expected to be limited by its reaction
with water forming predominantly insoluble polyureas.
Bioconcentration Factor (BCF): Bioconcentration potential is low (BCF < 100 or Log Pow <
3). 92; Cyprinus carpio (Carp)
Data for Component: 1,1,1,2-Tetrafluoroethane
Bioaccumulation: Bioconcentration potential is low (BCF < 100 or Log Pow < 3).
Partition coefficient, n-octanol/water (log Pow): 1.68 Estimated.
Mobility in soil
Data for Component: Diphenylmethane Diisocyanate, isomers and homologues
Mobility in soil: In the aquatic and terrestrial environment, movement is expected to be
limited by its reaction with water forming predominantly insoluble polyureas.
Data for Component: 4,4’ -Methylenediphenyl diisocyanate
Mobility in soil: In the aquatic and terrestrial environment, movement is expected to be
limited by its reaction with water forming predominantly insoluble polyureas.
Data for Component: 1,1,1,2-Tetrafluoroethane
Mobility in soil: Potential for mobility in soil is high (Koc between 50 and 150).
Partition coefficient, soil organic carbon/water (Koc): 97 Estimated.
Henry’s Law Constant (H): 5.00E-02 atm*m3/mole; 25 °C Measured
13. Disposal Considerations
DO NOT DUMP INTO ANY SEWERS, ON THE GROUND, OR INTO ANY BODY OF WATER. All
disposal practices must be in compliance with all Federal, State/Provincial and local laws and
regulations. Regulations may vary in different locations. Waste characterizations and compliance with
applicable laws are the responsibility solely of the waste generator. AS YOUR SUPPLIER, WE HAVE
NO CONTROL OVER THE MANAGEMENT PRACTICES OR MANUFACTURING PROCESSES OF
PARTIES HANDLING OR USING THIS MATERIAL. THE INFORMATION PRESENTED HERE
PERTAINS ONLY TO THE PRODUCT AS SHIPPED IN ITS INTENDED CONDITION AS
DESCRIBED IN MSDS SECTION: Composition Information. FOR UNUSED & UNCONTAMINATED
PRODUCT, the preferred options include sending to a licensed, permitted: Recycler. Reclaimer.
Incinerator or other thermal destruction device. For additional information, refer to: Handling &
Storage Information, MSDS Section 7 Stability & Reactivity Information, MSDS Section 10 Regulatory
Information, MSDS Section 15
14. Transport Information
DOT Non-Bulk
Proper Shipping Name: CHEMICAL UNDER PRESSURE, N.O.S.
Technical Name: 1,1,1,2-Tetrafluoroethane