Technical Specifications

Product name:
FROTH
-
PAK
™
650BF HFC CLASS A POLYOL
Spray Polyurethane Foam
Issue Date:
07/29/2014
Page 9 of 19
Contains component(s) which were negative in some in vitro genetic toxicity studies and positive in
others. Contains component(s) which were negative in some animal genetic toxicity studies and
positive in others.
Aspiration Hazard
Based on physical properties, not likely to be an aspiration hazard.
COMPONENTS INFLUENCING TOXICOLOGY:
Sucrose , propylene oxide
Acute inhalation toxicity
Typical for this family of materials. No deaths occurred following exposure to a saturated
atmosphere.
Polyester polyol
Acute inhalation toxicity
The LC50 has not been determined.
Tris(1-chloro-2-propyl) phosphate
Acute inhalation toxicity
LC50, rat, 4 Hour, dust/mist, > 7 mg/l
1,1,1,3,3 - Pentafluoropropane
Acute inhalation toxicity
LC50, rat, 4 Hour, vapour, 1,096 mg/l
1,2-Benzenedicarboxylic Acid, 3,4,5,6-Tetrabromo-, mixed Esters with Diethylene Glycol and
Propylene Glycol
Acute inhalation toxicity
LC0, 1 Hour, vapour, > 0.008 mg/l Other guidelines The LC50 value is greater than the
Maximum Attainable Concentration., No deaths occurred following exposure to a saturated
atmosphere.
Triethyl phosphate
Acute inhalation toxicity
LC50, rat, 4 Hour, dust/mist, > 2.35 mg/l
Polyethylene glycol
Acute inhalation toxicity
Typical for this family of materials. LC50, rat, 6 Hour, dust/mist, > 2.5 mg/l No deaths
occurred at this concentration.
2-エチルヘキサン酸カリウム塩
Acute inhalation toxicity
The LC50 has not been determined.
Glycerol propylene oxide
Acute inhalation toxicity
The LC50 has not been determined.
Diethylene glycol
Acute inhalation toxicity
LC50, rat, 4 Hour, dust/mist, > 4.6 mg/l The LC50 value is greater than the Maximum
Attainable Concentration., No deaths occurred at this concentration.