Use and Care Manual

Turn on the product
Open the valve of the CO2 cylinder, make sure no gas leaking, then press
the trigger on the gun glass chiller and it begins to work, get ready to chill
your glasses now!
It is advisable to keep the transparent cover close the rim of the glassware
but not too tight.
Replace the CO2 Cylinder
When the gun does not spray CO2 gas strong enough to frost a glass
between 7-10 seconds, or does not chill at all, this is an indication that it is
time to replace the empty cylinder with a full one, please follow the
instructions carefully.
1. Close the stopcock of the cylinder.
2. Press the trigger repeatedly until all pressure is released.
3. Screw off the CO2 gun glass chiller fitting from the cylinder.
4. Connect the unit to a cylinder full of liquid CO2 as instructed above.