Gun Glass Chiller User’s Manual
Packing List Gun Glass Chiller ×1 User’s Manual ×1 Sealing Rings ×2 WARNING: This product works with liquid CO2 only. Never connect any other compressed gas cylinders with high pressure. A liquid CO2 cylinder with siphon tube or dip tube is preferred to deliver liquid CO2. If a standard gas CO2 cylinder is used, the cylinder must be placed upside down to deliver liquid CO2. Install this product in a well ventilated area, otherwise a high level of CO2 may Accumulate.
Preparation Before Use Step 1: A CO2 cylinder with a siphon tube or dip tube to the bottom of it is preferred, so that the liquid CO2 can be delivered directly up to the dry ice machine, and achieve perfect performance. Step 2: AA(1.
Installation Step 1: Take the product out of the package and install the 2 batteries. Step 2: Loosen the nozzle and install the transparent cover.
Step 3: Take the sealing ring out of accessory bag, insert it into the connection nut. Step4: Connect the product with the CO2 cylinder. Firstly, use your fingers to screw the nut onto the valve of the CO2 cylinder. Secondly, use the wrench on product to reinforce the connection between the nut and cylinder.
Turn on the product Open the valve of the CO2 cylinder, make sure no gas leaking, then press the trigger on the gun glass chiller and it begins to work, get ready to chill your glasses now! It is advisable to keep the transparent cover close the rim of the glassware but not too tight.
