Product Manual

Handy-Spray - Assembly Instructions
www.frostserv.com
800-621-7910
B
G
F
C
A
1. Orient the handle so that the wires
face the rear of the cart (A)
2. Put the tab of the frame in the lower
hole of the handle (B)
3. Insert bolt through the hole in the
frame and the upper hole in the handle.
Secure with nut (C)
4. Connect blue spade connector to
the negative terminal on the battery
and the red connector to the
positive side of the battery. (D)
8. Insert suction tube into the container (G)
6. Insert tube fitting into the bracket hole
and thread on nozzle holder (F).
7. Attach desired nozzle to nozzle
holder and twist the nozzle to orient
spray
5. Connect the flat two pin connector to
the pump (E)
D
E