Specifications

Quality
Value
Service
Retractable shower seat
Code 972: All stainless steel with white phenolic top
Download
PDF
Specifications:
All stainless full wall mounted shower seat, phenolic top, white finish.
Features: Compact flip up shower seat retracts out of way when not in use. One piece phenolic
top, 5/16” (8mm) thick. Unit frame is fabricated from 1” O.D. 18 gauge brushed finish type 304
stainless steel. Welded construction, features full 360 degree welds on all joints. Support and
flanges are also stainless steel with brushed finish.
Load Capacity: The shower seat will support a load of 450 lbs when properly installed. The
shower seat is only as strong as the anchors and wall to which it is attached and therefore must
be firmly secured in order to sustain the load(s) for which it is intended. We suggest installation
by a qualified tradesperson.
Installation: Mounting hole locations are for reference when providing in wall support. Final
holes should be drilled using shower seat as a template. Mounting screws provided.
Description and specifications applicable on date issued. Frost reserves the right to make improvements or changes without notice.
Page
1
of
1
Specification sheet, Frost Products Ltd. Code 972
16/08/2010
http://frostpl.com/tech_ref/tr_972.htm