User's Guide

Battery

Installing the battery

1. Unscrew the battery door on the back of the microphone using

the supplied Phillips screwdriver.

2. Fit silicone cushions on each end of the battery.

3. Insert the battery’s connector into the receptacle.

4. Insert the battery into the case.

5. Replace battery door.

6. For best performance, charge the battery in the microphone

overnight before initial use.

Battery Safety

Warning: To reduce risk of fire or burns:

 Do not use batteries that have been dropped or otherwise

damaged.

 Do not attempt to open, disassemble or service the battery

pack.

 Do not crush, puncture or short external contacts or dispose

of in fire or water.

 Do not use the battery if exposed to moisture.

 Do not expose to temperatures above 40 degrees C (104

degrees F).

 Replace only with the battery pack designed for this product.

 Batteries shall not be exposed to excessive heat such as

sunshine, fire or the like, or excessive cold.