Owners manual

Headache Rack

Step 1: Position and center headache

rack on truck bed allow for space between

rack and cab of truck.

Step 2: Drill four holes, as shown in

picture, through angle plate and through

truck bed lip. Be sure to avoid front stake

pockets when drilling. Place two 1/4” bolts

through the plate and truck bed

Step 3: Tighten all bolts.

Note: Periodically check bolts to ensure

that bolts remain tight.

Need Help? Call Frontier at 800.634.3086 or E-mail info@frontier-gear.com.

Qty Description

4 ¼” X 1-1/2” Hex Bolt

8 ¼” flat washers

4 ¼” nuts

4 ¼” lock washers

20 Total Pieces

Bolt Bag Contents

PAGE 1
Headache Rack Bolt Bag Contents Qty Description 4 ¼” X 1-1/2” Hex Bolt 8 ¼” flat washers 4 ¼” nuts 4 ¼” lock washers 20 Total Pieces Frontier Truck Gear © 2007 Step 1: Position and center headache rack on truck bed allow for space between rack and cab of truck. Step 2: Drill four holes, as shown in picture, through angle plate and through truck bed lip. Be sure to avoid front stake pockets when drilling. Place two 1/4” bolts through the plate and truck bed Step 3: Tighten all bolts.