Installation Manual

5
With the Drawer System placed loosely inside the vehicles load bay, secure the Tank to the rear of the
Drawer System using the fasteners removed in Step 2E as shown below. Note the left hand side shows the
Drawer System with the "side" Corner Wing Assembly fitted and the right hand side shows the Drawer
System without the "side" Corner Wing Assembly fitted.
( A )
Referring to the appropriate Fitment Guide, secure the Drawer System in position.
() B
INSTALL Water Tank
Secure the Inlet, Outlet and Breather/Overflow Hoses (Items 1, 17, 18) to the Tank and Pump using three
16-25mm Hose Clamps (Items 3) as shown.
() C
REV_A01