Installation Manual

3
Prepare FOR INSTALL
Wrap a small amount of thread tape around the thread of the three Plastic Elbows (Item 2) and secure
them to the sides of the Water Tank (Item 6) as shown.
() A
Clip the Pump Elbow and Pump Filter (Items 7 & 9)
into the Pump (Item 8) as shown.
() B
() C
Secure the Pump assembly from Step 2B
to the Tank (Item 6) using the four M5
Flat Washers and four M5 Nyloc Nuts
(Items 11 & 12).
REV_A01