Installation Manual

13
11
12
1RH
10
TBMK012_REV_A01 3
FIT AND SECURE
2
2.1
2.2
2.3
13MM
13MM
Measure the distance between the center
points of the Rack Mount Brackets. You will
need this measurement for fitting the Latch
Bracket assembly to the tent channel in
Step 2.6.
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
Taking into account the length and width
of your tent, choose where you'd like to
position it on the rack. This will determine
where you need to fit the Mount Brackets
(Items 1 & 2).
Loosely fit the Mount Brackets to the
rack using M8 x 20 Hex Bolts, M8 x 16 x
1.6SS Flat Washers and M8 Nyloc Nuts
(Items 10, 11 & 12). Note the position of the
Mount Brackets and the Latch orientation.
Make sure that the closed side of the Mount
Brackets are facing toward the front of the
rack and that they are parallel to the side of
the rack.
CENTER
2LH
2RH
Right Hand Mount
Left Hand Mount
2LH
2RH
Right Hand Mount
Left Hand Mount
CENTER
FRONT
FRONT
Where possible use the combined slats.
For larger & heavier tents stagger the tent
mounting brackets as shown.