Installation Manual

TBMK010_REV_A05
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4
2
9
6
7
8
4
FIT AND SECURE TENT TO LOAD BARS
3
13MM
3.1
3.2
Place the tent onto of your Load Bars.
Using four Tent Spacer Bases (Item 4), secure
the tent to the Load ars using M8 x 16 x 1.6SS
Flat Washer and M8 Nyloc Nuts (Items 6 & 7)
as show.
Place M8 Nut Caps (Item 8) over all the
Nyloc Nuts.
Assemble the M8 x 45 Coach Bolts and the
Channel Plates (Items 1 or 2 & 5)
Slide two assemblies into the tent channel
on each side.
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
5
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
4
Congratulations! You did it. Take a step back and admire your work!
Use Channel Plate closest to mounting
channel.