Installation Manual

TBMK010_REV_A05 3 © 2020 FRONT RUNNER VEHICLE OUTFITTERS
2
5
3
4
4
6
7
8
FIT AND SECURE TENT TO ROOF RACK
2
Using the remaining 4 Tent Spacer Bases
(Item 4), secure the tent to the slats with
M8 x 16 x 1.6SS Flat Washer and M8 Nyloc
Nuts (Items 6 & 7).
Place M8 Nut Caps (Item 8) over all the
Nyloc Nuts.
13MM
2.1
2.2
2.3
Before placing the tent onto of your
Slimeline II Rack, slide a Tent Spacer and a
Tent Spacer Base (Items 3 & 4) onto the
M8 x 75 Carriage Bolts.
Do this on all 4 assemblies.
Assemble the M8 x 75 Coach Bolts and the
Channel Plates (Items 1 or 2 & 5).
Slide two assemblies into the tent channel
on each side.
Use Channel Plate closest to mounting
channel.
Tightening Torque 20Nm / 15ft lb