Installation Manual

TBMK009_REV_A02
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
2.2
2.3
2.4
2.1
2.1
2.2
2.3
4MM
2
3
4
5
1
Slide four M8 Channels Nuts (Item 5) into
each of the tent mounting channels.
Apply the Rubber Strip (Item 6) to the Tent
Support Channels so that it sits between the
Channel and the tent.
Loosely fit the Tent Support Channels to the
tent by using M8 x 25 Button Head Bolts,
M8 SS Spring Washers and M8 x 16 x 1.6SS
Flat Washers (Items 2, 3 & 4) as shown.
Fit your tent mounting system (TBMK012)
to the Rack.
Refer to TBMK012 fitment guide for
instructions.
Move the Tent Support Channels (Item 1)
outward as shown to create sufficient
support underneath the tent where needed.
Fully tighten the Tent Support Channels to
the tent.
11