Installation Manual

ManualsBrandsFront Runner Manuals4WD & CampingHard Shell Tent Support Channels

ENG

Hard Shell Tent

Support Channels

TBMK009_REV_A02

IMPORTANT WARNING!

Thank you for purchasing Front Runner Hard Shell Tent Support Channels.

Before you start, take a moment to familiarize yourself with this Fitting Instruction and the components received.

Refer to Page 2 for a list of all the components, quantities and tools required.

TBMK009

READ ME !

FRONT RUNNER CAN NOT RECOMMEND A MAXIMUM LOAD CARRYING CAPACITY. PLEASE REFER TO YOUR VEHICLE MANUFACTURER'S RECOMMENDATIONS. IT IS CRITICAL

THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN

AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS

TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE YOU

MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU

DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE

INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

Summary of content (4 pages)

PAGE 1
ENG Hard Shell Tent Support Channels TBMK009 READ ME ! Thank you for purchasing Front Runner Hard Shell Tent Support Channels. Before you start, take a moment to familiarize yourself with this Fitting Instruction and the components received. Refer to Page 2 for a list of all the components, quantities and tools required. IMPORTANT WARNING! FRONT RUNNER CAN NOT RECOMMEND A MAXIMUM LOAD CARRYING CAPACITY. PLEASE REFER TO YOUR VEHICLE MANUFACTURER'S RECOMMENDATIONS.
PAGE 2
1 GET ORGANIZED INTHE THEBOX BOX IN 1 2 3 4 5 6 2X 8X 8X 8X 8X 4X TOOLS NEEDED Hard Shell Tent Channel Support M8 x 25 Button Head Bolt M8 SS Spring Washer M8 x 16 x 1.6 SS Flat Washer M8 Channel Nut Rubber Strip 5mm FIGURE 1.
PAGE 3
FIT AND SECURE 2 2.1 2.1 2.4 Slide four M8 Channels Nuts (Item 5) into each of the tent mounting channels. 2 1 3 4MM Apply the Rubber Strip (Item 6) to the Tent Support Channels so that it sits between the Channel and the tent. Loosely ﬁt the Tent Support Channels to the tent by using M8 x 25 Button Head Bolts, M8 SS Spring Washers and M8 x 16 x 1.6SS Flat Washers (Items 2, 3 & 4) as shown. 4 5 2.2 2.2 Fit your tent mounting system (TBMK012) to the Rack.
PAGE 4
COMPLETION 3 3.1 9 Congratulations. You did it. Take a step back and admire your work! 4 5 Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions. Please call us if you have any questions about the installation of this product. INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or Online. Be sure to tag us.