Installation Manual

6
Install Drawer System
REV_A02
Secure the Side Wing Assemblies from Step 2A to the Drawer System using six M6 x 20 Hex Bolts, six M6
Spring Washers and six M6 Flat Washers (Items 18, 20, 21) received with SSWO001.
When Securing the TOP mounting of the MIDDLE Wing Assemblies, loosely secure a D-ring (Item 4) to the
Drawer and Wing Assembly using a M6 x 20 Hex Bolt, M6 Spring Washer and M6 x 19 Flat Washer (Item 5,
6, 7) received with SSDR010 as shown.
()
B
Lift the Drawer System (Item 1) into the vehicle's load bay and position it 35 mm in from the front of the
load bay as shown and center the draw left to right.
()
A
35 mm
Tail Gate