Installation Manual

7
Install DrawER System
REV_A02
Secure the bottom of the Side Wing Assemblies from Step 2A to the Drawer System using four M6 x 20
Hex Bolts, four M6 Spring Washers and four M6 Flat Washers (Items 17, 18, 21) received with SSWO001.
When Securing the TOP of the Wing Assemblies, loosely secure a D-ring (Item 4) to the Drawer and Wing
Assembly using a M6 x 20 Hex Bolt, M6 Spring Washer and M6 x 19 Flat Washer (Item 5, 6, 7) received
with SSWO008 as shown.
() B
Lift the Drawer System (Item 1) into the vehicle's load bay and position it 60 mm in from the front of the
load bay and center it from left to right.
()
A
Tail Gate
60 mm
Load Ba
y