Installation Manual

4
Install drawer cont...
REV_A00
Slide the three Channel Nuts (Item 13) into the Track (Item 16). Place the Track under the front cross strap
of the Drawer System. Line the three Channel Nuts inside the Track up with the mounting holes in the
cross strap (as indicated by the arrows) and loosely secure the Track in position using the three M8 x 16
Hex Bolts, three M8 x 25 Flat Washers and three M8 Springs Washers (Items 12, 14, 15). Center the Track
from left to right and fasten.
() D
( F )
Connect a Turn Buckle and C-Hook (Item 11) to each of the D-rings assembled to Drawer System in Step 2C
() E
Place the Drawer System into the vehicle and position as desired.