Installation Manual

5
Install drawer cont...
REV_A00
With the Turn Buckles and C-hooks in position, work out how best to secure the "hook end " of the Turn
Buckle to the vehicle. Referring to the image below, note that the Turn Buckles must all pull away form
each other in order to prevent the Drawer System from moving one secured into position.
As mentioned on the front page, you may require additional fasteners and tools at this stage in order to
create suitable mounting points.
( G )
Once you have the four mounting points on your vehicle, secure the Drawer to the vehicle by tightening
the four Turn buckles. Once the Drawer is secure in position tighten the Wing Nuts on the Turn Buckles
and the Bolts securing the D-rings to the Drawer System and the vehicle's load bay.
() H