Installation Manual

SSDR003_REV_A00
© COPYRIGHT 2018 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
2.1
2.2
2.3
Assemble each of the 4
Turnbuckles (Item 7) with a Wing Nut
(Item 6) as shown. The wing nut will be
used to lock the Turnbuckles after they
have been set.
4
3
2
7
6
Assemble the Eye-Nuts with a M6 Nylon
Washer and a Stud Plate
(Items 2, 3 & 4) and slide them into the
extrusion.
10MM
8
9
12
10
Secure four D-Rings (Item 10) on the side
of the drawers pillars using M6 x 20 Hex
Bolts, M6 SS Spring Washers and
M6 x 19 x 1SS Flat Washers as shown.