Installation Manual

SSDS123_REV _A01
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE 2
2.4
2.5
2.6
Slide two M6 Channel Nuts (Item 7) into
each of the two tracks (Item 3).
These will be used in 2.7 to secure the
drawer.
Slide two M6 Channel Nuts (Item 7) into
each of the two seat rails.
Loosely fit the tracks to the vehicles seat
rails using M6 x 30 Countersink Screws and
M6 Channel Nuts (Items 7 & 8).
Refer to 2.6 for placement.
Secure the first Track (Item 3) 60mm from
the rear end of the seat rails.
Secure the second Track 350mm center to
center from the first track as shown,
Rear Of Vehicle
Seat Rails
60mm
350mm
7
3
7
7
8
8
3
4mm
10mm