Installation Manual

5
INSTALL DRAWer SYSTEM
Secure the front and rear of the Drawer System to the vehicle using the Turnbuckles and C-Hooks (Items
2, 6, 8, 10) as shown below. Ensure the Drawer System remains in position while tightening the Turnbuck-
les.
()
C
D-Ring on Drawer
115 mm C-Hook
Turnbuckle with
Wingnut at Top
37 mm C-Hook
Eye Nut from
Step 3B
D-Ring on Drawer
60 mm C-Hook
Turnbuckle with
Wingnut at Top
37 mm C-Hook onto
Mounting Bracket
from Step 2B
FRONT
REAR
Loosely assemble the two M6 Eye Nuts, two M6 x 30 Flat Washers and two M6 Stud Plate (Items 17, 18, 19
- received with SSDS104) and secure the assembly to the accessory slot found either side at the rear of
the vehicle as shown.
()
B
Insert from Here
SSDS104 / SSTP003_REV_A00