Installation Manual

4
Prepare for installation cont...
Loosen the nine Countersunk Bolts securing the Rear Deck to the Drawer System. Lift the Deck and
place the Left and Right Hand Rear Wing Brackets (Items 13) in position between the Deck and Drawer
System as shown. Secure the Deck back to the Drawer System, "sandwiching" the Wing Brackets be-
tween the Deck and Drawer System.
()
D
INSTALL DRAWer SYSTEM
Place the Drawer System (Item 1) into
the vehicle taking care not to scratch
the interior of the vehicle Position the
Drawer System 5mm in from the edge
of the plastic trim at the rear of the
vehicle. Center the Drawer System left
to right.
()
A
5 mm Gap
SSDS104 / SSTP003_REV_A00