Installation Manual

2
Deck completion set Assembly
You will need:
2x 10 mm Flat or Socket Wrench
Item # Quantity Description
1 16 M6 NYLOC NUT
2 20 M6 x 19 FLAT WASHER
3 4 SIDE WING - 2 LEFT, 2 RIGHT
4 4 WING SLIDER - 2 LEFT, 2 RIGHT
5 20 M6 x 16 HEX BOLT
6 8 M6 SPRING WASHER
( a )
Assemble the Side Wing and the Wing Slide (Items 3, 4) as shown below using two M6 x 16 Hex Bolts,
two M6 flat Washers, two M6 x 19 Flat Washers and two M6 Nyloc Nuts as shown (Items 1, 2, 5, 6)
SSWS003_REV_A00