Installation Manual

8
Install The Cargo Slide cont...
With the help of a friend, lift the Cargo Slide into the vehicle, taking care not to damage the vehicle.
Open the Slider slightly to gain access to the rear mounting feet, as indicated by the arrows. Do not
open the slider more than is needed as it will lift up and forward and could result in damage to the
vehicle. Line the holes in the rear mounting feet up with the two mounting points from Step 3C.
Loosely secure the two rear mounting feet to the vehicle using two M6 x 30 Button Head Bolts, two M6
Spring Washers and two M6 x 19 x 1 Flat Washers (Items 3, 4, 5) supplied.
()
D
Open the Cargo Slide fully to expose the front mounting feet, as indicated by the arrows. Lift the front of
the Cargo Slide and place the Front Mounting Strap (Items 2) underneath the mounting feet as shown.
()
e
Close the Cargo Slide and position it so as to sufficiently clear the rear door when closed. Once you are
happy with the position of the Cargo Slide, carefully open the Slide as not to move its position and mark
the location of the front mounting points (Refer to Step 3E) onto the vehicle's carpet.
() F
Mounting Strap
SSST003_REV_A01