Installation Manual

2
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Grab a cup of coffee and take a moment. A little prep now may save
you a lot of time later.
GET ORGANIZED...
Here is what you are looking at::
You will need:
 4 mm Hex Key
 Marking Pen
 Utility Knife
 A Friend
 Insulation & Masking Tape *
 9 mm Drill Bit *
 Drill Machine *
 Rivnut Gun *
() A
* Only used when installing Cargo
Slide to vehicles with removable
speaker box. Refer to the bottom of
Page 3.
Item # Quantity Description
1 1 CARGO SLIDE
2 1 FRONT MOUNTING STRAP *
3 4 M6 x 30 BUTTON HEAD BOLT
4 4 M6 SPRING WASHER
5 4 M6 x 19 x 1 FLAT WASHER
6 2 M6 RIVNUT *
7 2 M6 x 40 BUTTON HEAD BOLT*
* Only used when installing Cargo Slide to vehicles with
removable speaker box. Refer to the bottom of Page 3.
SSST003_REV_A01