Installation Manual

10
ADJUST RUBBER STOPPER
()
A
Working from the rear of the Slider with it in the closed position, push
against the bolt attached to the Rubber Stopper (refer to arrow) so tha
t
the Stopper is pushing up against the Slider. With pressure still being
applied to the bolt, fasten Nut 2 until it just touches the Flat Washer 2.
Tighten Nut 1 whilst holding Nut 2 with a wrench. Repeat for opposite
side.
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
Now's the time to visit your favorite Front Runner dealer in person or on-line.
() A
REV_A00