Installation Manual

SSDR011_REV_A01
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
Connect the C-hooks (item 9) onto the
D-rings (item 5) on the drawers upright.
Connect the turnbuckles (item 11) on the
other side of the C-hooks and hook it into
the tie-down that are fitted to the
vehicle.
Secure the drawer by tensioning the
turnbuckles until there is no more
movement on the drawer. Make sure the
drawer stays in position when doing this.
Lock the turnbuckles with the wing nuts.
Do this by tightening the wing nuts up to
the turnbuckles.
Refer to diagram 2.2
2.4
2.5
4
3
2
9
5
11
Assemble the eye-nuts (item 2) with a
M6 nylon washer (item 3) and a stud plate
(item 4) and slide them into place.
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!