Installation Manual

SSDR011_REV_A01
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
6
2.1
2.2
2.3
Secure the 4 D-Rings (item 5) on both
sides of the drawer using the fasteners
shown.
Assemble each of the 4
turnbuckles (item 12) with a wing nut
(item 10) as shown. The wing nut will be
used to lock the turnbuckles after they
have been set.
Place the drawer in the vehicle
and position as desired. Making
sure the turnbuckles are pulling
outward to prevent the drawer
from moving after it has been secured.
5
6
7
8
10MM
9
11
10