Installation Manual

SSDS122_REV _A00
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
5
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!
FIT AND SECURE 2
2.7
2.8
Secure the Front Face Plates (Item 3LH &
3RH) to the Drawer using M6 x 16 Button
Head Bolts (Item 16) as shown.
If you want to fit electrical sockets, use the
Face Plates With Knock-Outs (Item 3).
Socket Inserts (sold separately) can be
installed into this Face Plate.
ECOM117 - Amp Meter
ECOM118 - USB Socket
ECOM119 - 12/24V Socket
ECOM120 - Merit Socket
ECOM121 - Engel Socket
ECOM124 - Volt Meter
Fit the Side Decks and Rear Decks (Items
1 & 2) to the Drawer by placing them into
the C-Clips and pushing downward. Secure
the middle of the Rear Decks using M6 x 30
Countersink Screws and M6 Finishing
Washers (Items 12 & 13) as shown.
4mm
4mm
16
4
12
13
1
2