Installation Manual

SSDS122_REV_A00
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Before fitting the Side Wings to the Drawer,
relocate the four cage nuts shown in 2.2
and 2.3 and fit the D-Rings supplied with
the Drawer (SSDR011). There are two cage
nuts on each side of the drawer.
Relocate the cage nuts.
Before you start the fitment of the
Deck Completion Set, the Base Deck
(SSDS121) needs to be fitted.
Ensure that the mounting holes for the
D-Rings are punched through the carpet.
10mm
10mm
10mm
Secure four D-Rings (Item 14) using M6 x
30 Hex Bolts, M6 SS Spring Washers and
M6 x 19 x 1SS Flat Washers (Items 10, 15 &
18) into the Base Deck Bracket Cage Nut as
shown.
Do this on both left and right side.
Punch Holes
Remove
Remove
Relocate here
Relocate here
18
10
15
14