Installation Manual

SSDS121_REV _A00
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE 2
2.4
2.5
2.6
Secure the Middle Cross Member (Item 3) as
shown, using the bolts removed in 2.1.
Secure the Rear Cross Member (Item 2)
using the bolts removed earlier in 2.1.
Secure the Left and Right Base Decks (Item
1LH & 1RH) to the Cross Members using M6
x 30 Countersink Socket Screws (Item 9) as
shown.
Front Of Vehicle
Front Of Vehicle
3
3
Before securing the Middle Cross Member
(Item 3), loosen the rear seat belt bolts.
Place the Cross Member down first, followed
by the seat belt bracket and align all holes.
Secure using the bolts removed earlier.
Do this on both left and right side of the
vehicle.
Place Seat Belt Bracket Here
Front Of Vehicle
1
9