Installation Manual

SSDS121_REV_A00
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Before you start the fitment, remove the
two rear seats and the storage box from
the vehicle. Keep the fasteners as you will
be using them for the fitment of the Cross
Members.
Remove the recovery equipment and store in
a safe place.
Clip M6 Cage Nuts (Item 5) into the bottom
of each Cross Member (Items 2, 3 & 4) as
shown.
Secure the Front Cross Member (Item 4) to
the seat front clip bracket using M6 x 16
Hex Bolts, M6 x 12 x 1SS Flat Washers and
M6 Nyloc Nuts (Items 6, 7 & 8) as shown.
Do this on both left and right side of the
Cross Member.
Front Of Vehicle
8
7
4
6
5
2
3
4