Installation Manual

SSDS803_REV_A00 3
4
6
13
5
12
11
FIT AND SECURE
2
Place the drawer system into the vehicle,
locating it as far back as possible without
interfering with the rear door operation.
10MM
10MM
4MM
Fit the four mounting brackets, two left
and two right. There are two different height
options available when mounting the
brackets. Choose the option best suited
to your vehicle.
The brackets should rest on the wheel
arches.
2.1
2.2
2.3
Loosen and remove both the left and right
rear fender liners.
Make sure there are not pipes, pump or
electrical components inside the wheel
arches as you will be drilling the mounting
holes through the arches.
Refer to Diagram 2.4.