Installation Manual

SSDS124_REV_A01
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
5
8
10
9
FIT AND SECURE
2
2.7
2.8
2.9
Secure the RH Face Plate (Item 8) and LH
Face Plate (Item 10) to the Drawer using
four M6 x 12 Button Head Screw (Item 9).
Secure the Drawer System in position using
the Turn Buckles (supplied with SSDR011)
and Carabiner (Item 14) as shown.
Depending on the combination of Wing Sets
used during fitment:
Use LH Side Deck (Item 13) with the Wing
Set assembly in 2.5.
Use LH Side Deck (Item 1) with the Wing Set
assembly in 2.6.
Use LH Side Deck (Item 11) with the Wing
Set assembly in 2.7
Place the relevant LH Side Deck and the RH
Side Deck (Item 3) onto the Drawer making
sure that you slide it into the C-clip of the
Side Wings.
Secure the two LH Side Wing (Item 12) to
the Drawer System using four M6x19x1SS
Flat Washers, four M6 Spring Washers and
four M6x20 Hex Head Bolts (Item 7, 6 & 5)
FITMENT IN VEHICLE WITH
STORAGE UNIT
7
6
5
12
10mm
3
13
1
11
A
B
C
C
4mm
12