Installation Manual

SSDS124_REV_A01 3 © 2021 FRONT RUNNER VEHICLE OUTFITTERS
Remove
Remove
Relocate here
Relocate here
Cage Nut
Relocate here
FIT AND SECURE
2
2.1
2.2
2.3
10mm
Before positioning the Drawer System
(SSDR011) in the vehicle, unclip the four
Cage Nuts as shown to relocate. Do this
on both left and right side.
Relocate the Cage Nuts to the position
shown on both sides of the drawer.
Secure the D-Rings, using the fasteners,
supplied with the Drawer System
(SSDR011) as shown. Two on the right hand
side and two on the left hand side.
Do this on both sides of the drawer.
D-Ring