Installation Manual

2
GET ORGANIZED...
Here is what you are looking at:
You will need:
13 mm Flat or Socket Wrench
4 mm Hex Key
4mm & 9mm Drill Bits
Drilling Machine
20mm Hole Punch
Clinch Nut Tool
Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
( A )
Item # Quantity Description
1 10 M6 x 30 Countersunk Cap Screw
2 4 M10 Flat Washer
3 12 M8x19x3 Flat washer
4 4 M6 Clinch Nut
5 4 M6 x 25 Countersunk Cap Screw
6 1 Deck
7 1 Drawer
SSLD002_REV_A00