Installation Manual

SSDS112_REV _A01
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.1
2.2
2.3
Loosen and remove the eye bolt of the
Turnbuckles (Item 2) supplied with
SSDR011 and assemble a M6 Wing Nut
(Item 3) as shown. Reassemble the
Turbuckle
Remove the storage cover from the vehicle.
Lift the plastic storage liner and remove the
jack and toolkit form the vehicle.
Loosen and remove the two tie down rings
either side of the vehicle as indicated. The
threaded mounting points in the vehicle's
body will be used to secure the Mounting
Plate (Item 12) to the vehicle in Step 3.1.
10MM