Installation Manual

8
Install Drawer System cont...
REV_A02
Secure the Side Wing Assemblies from Step 2A to the Drawer System using eight M6 x 16 Hex Bolts, eight
M6 Spring Washers and eight M6 Flat Washers (Items 18, 20, 21) received with SSWO001 as shown.
()
B
Position the Corner Wing Assemblies from Step 2B over the corners of the Drawer as shown. Secure the
Assemblies to the Drawer using the remaining M6 x 20 Hex Bolts, M6 x 19 Flat Washers and M6 Spring
Washers. When securing the TOP mounting on the side of the Drawer, loosely fasten a D-Ring (Item 4) to
each corner as shown.
(
C
)