Installation Manual

7
Install Draw System
REV_A02
Secure the Side Wing Assemblies from Step 2A to the Drawer System using six M6 x 20 Hex Bolts, six M6
Spring Washers and six M6 Flat Washers (Items 17, 18, 21) received with SSWO001.
When Securing the TOP mounting of the FRONT Wing Assemblies, loosely secure a D-ring (Item 4) to the
Drawer and Wing Assembly using a M6 x 20 Hex Bolt, M6 Spring Washer and M6 x 19 Flat Washer (Item 5,
6, 7) received with SSWO008 as shown.
() B
Lift the Drawer System (Item 1) into the vehicle's load bay and position it 20 mm in from the front of the
load bay and center it from left to right.
()
A
20 mm
Tail Gate