Installation Manual

6
Prepare for installation cont...
REV_A02
()
G
90 mm
Drill 6.5 mm Hole here
either side of Load Bay
Tailgate
Tailgate
Working at the front of the load bay, make a mark on either side of the load bay, 160 mm in from the front
of the load bay and 90 mm in from the side of the load bay. Drill a 6.5 mm hole on each of your markings
Secure the two D-rings (Item 32 received with SSDS401) to the inside of the vehicle's load bay by bolting
through the two 6.5 mm holes drilled in Step 2G, using two M6 x 25 Hex Bolts, four M6 x 19 Flat Washers
and a two M6 Nyloc Nuts (Items 33, 34, 35 received with SSDS401) as shown.
()
H
Front of Load Bay
160 mm
Front of Load Bay