Installation Manual

1
RRAC182_REV_A01
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
Decide which slats would be best suited for
mounting your roof rack accessory.
Slide two M8x20 T-Bolts (Item 2) into each
slat as shown.
Loosely assemble the Mounting Brackets
(Item 1) onto the slats using four M8 Flat
Washers and four M8 Nyloc Nuts (Items 3 &
4) as shown.
Push the Mounting Brackets up to the side
edge of the of the rack. Fully tighten.
Finish off by placing four M8 Nut Caps (Item
5) over the M8 Nyloc Nuts (Item 4).
2.3
The Mounting Brackets (Item 1) orientation
is roof rack accessory dependant.
2
2
5
4
3
Side Edge
1
1
13mm