Installation Manual

RRAC178_REV_A00
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Determine where you want to mount your
Shower Cubicle on the side of your Front
Runner Rack.
The Shower Cubicle frame spans over six
slats.
Slide two M8 Nyloc Nuts (Item 11), nyloc
facing down in the side profile using the
opening on the inside of the corner as show.
Align the nuts with slat 1 and slat 6. See 2.2.
Slide two M8 Thin Nuts (Item 10) into the
chosen slats using the machined slots as
shown.
Secure the Top and Bottom Brackets (Items
3 & 4) to the rack using M8 x 16 Button Head
Bolts, M8 x 25 Button Head Bolts, M8 x 16
x 1.6SS Flat Washers, M8 Schnorr Washers
(Items 6, 7, 8 & 9) and the nuts inserted in
2.1 as shown
Insert two Poles (Item 2) through both the
holes in the Top Bracket (Item 3) as shown.
4mm
1
2
3
4
5
6