Installation Manual

RRAC171_REV_A00
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
6
FIT AND SECURE 2
2.10
2.11
2.12
Apply the measurement from 2.4 to the cen-
ters of the Catch Brackets and fully tighten
the Catch Brackets. Finish off by placing M8
Nut Caps (Item 12) on the M8 Nyloc Nuts.
Measure the length between the centers of
the Catch brackets.
Apply the measurement from 2.10 to center
the Narrow Box Brackets and fully tighten.
Finish off by placing M8 Nut Caps (Item 12)
on the M8 Nyloc Nuts.
Lower the Cargo Box onto the rack making
sure the Quick Release Feet align with the
rack mounted Catch Brackets.
Push the cargo box forward so that the
Quick Release Bobbins slide fully into the
Catch Brackets.
Latch all 4 Latches to secure the cargo box
into the brackets.
Apply Measurement
Length
Apply Measurement
Width
Measure
Length
Front of Rack
13mm
13mm