Installation Manual

RRAC171_REV_A00
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE 2
2.4
2.5
2.6
Measure the width between the centers of
your cargo box mounting slots.
The position of the mounting slots of your
cargo box, vary from make and model.
Using the measurement from 2.4, cut the
T-Slot Rubber (Item 17), removing 20mm
extra to allow for the bolts to pass through.
Cut the remaining piece into 2 as shown.
Insert the T-Slot Rubbers into the T-slot of
each Slat with the M8x35 Hex Head Bolts
(Item 16) positioned as shown.
Insert the four Slat End Caps (Item 2) into
the left and right ends of the assembled
Slats.
Measure
Width
Measured Distance
700mm
17
2
Bottom View