Installation Manual

RRAC169_REV_A02
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Determine in which direction the Awning
Mount Bracket (Item 1) will fit on your
awning.
The Bracket can be turned vertically or
horizontally.
Assemble the Bobbins and Catches (Items
4 & 5) to the Awning Mount Brackets (Item
1) using a M8 x 20 Button Head Bolts, M8
x 35 Button Head Bolts, M8 x 19 x 2SS Flat
Washers, M8 x 16 x 1.6SS Flat Washers
and M8 Nyloc Nuts (Items 6, 7, 8, 9 & 11) as
shown.
Finish off by placing M8 Nut Caps (Item 14)
on the Nyloc Nuts.
Loosely fit the assembly from 2.2 onto the
back of your awning. Depending on the
make of your awning use either M6 x 16
or M8 x 16 Hex Bolts, Nyloc Nut and Flat
Washers. (Items 12, 16 & 17 or 5, 7 & 13) as
shown
The Brackets will be fully tightened in 2.5.
5mm
13mm
13mm
10mm
14
7
6
1
4
5
11
8
9
13
7
5