Installation Manual

RRAC168_REV_A00
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE 2
2.4
2.5
2.6
Align the bottom slot in the Antenna Mount
with the bottom hole in the Side Profile.
Using a M8 x 20 Button Head Bolt and M8 x
16 x 1.6SS Flat Washer (Item 9 & 8), secure
the Antenna Mount to the Side Profile.
Fully tighten all the bolts and refit the
corner. Finish off by placing a M8 Nut Cap
(Item 13) on the M8 Nyloc Nut.
To mount an antenna with a magnetic base,
secure the Antenna Mount Plate (Item 1) to
the already secured Antenna Mount using
two M5 Flat Washers and two M5 Nyloc
Nuts (Item 5&6). Finish off by placing two
M5 Nut Caps (Item 7) on the M5 Nyloc Nuts.
5mm
9
8
13
1
6
7
5
8mm