Installation Manual

RRAC168_REV_A00
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Determine where on the Side Profile you
would like to mount your antenna. Remove
the corner closest to that position.
Use the Slat closest to the position your
Antenna Mount will be secured too.
Remove the bottom Button Head Screw of
the Side Profile.
Slide two M8 Nyloc Nuts (Item 10) into the
Side Profile.
Slide the M8 x 16 Hex Head Bolt (Item 11)
into the Slat.
Place the Antenna Mount Assembly (Item 4)
over the Side Profile and the Mount
Stiffener (Item 12) as shown. Loosely
secure the Antenna Mount Assembly and
the Mount Stiffener at the top using two M8
x 25 Button Head Bolts, M8 Nyloc Nut, three
M8 x 16 x 1.6SS Flat Washers (Items 14, 10
& 8).
4mm
5mm
11
10
10
4
12
14
10
8
13
5mm
13mm
A
A