Installation Manual

RRAC137_REV _A01
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE 2
2.4
2.5
If you want to create more space on your
rack, the Pro Canoe / Kayak Carrier can be
mounted to the left or right side, overhanging
the rack as shown. (Refer to Step 2.5)
Adjust one arm of the Carrier up or down as
required, aligning the hole on the outside of
the Carrier with one of the five adjustment
holes on the inside of the Carrier.
Fasten the Carrier in position using M6 x 25
Button Bead and M6 Nyloc Nuts
(Items 6 & 7) as shown removed earlier.
Place M6 Nut Caps (Item 8) over the Nyloc
Nuts.
Secure your Kayak/Canoe using the
Stratchits (Item 9) supplied. The Carabiners
are attached to the Carriers on one of the
cross bars as indicated or by using the M8
Eye Nuts, M8 Nylon Washers and M8 x 16
Hex Bolts and fixing them in a suitable
T-slot on your Rack.
7
8
6
4mm
10mm