Installation Manual

RRAC124_REV_A01
© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
4
13
11
10
6
9
8
FIT AND SECURE THE FRONT MOUNT BRACKETS FRONT MOUNT BRACKETS
2
2.4
2.5
Secure the light bar to the Mounting
Brackets using two M8 x 25 Hex Bolts, two
M8 Spring Washers, two M8 x 16 x 1.6SS
Flat Washers, the Spacer and M8 x 19 x 2SS
Flat Washers (Items 11, 10, 6, 9 & 8) as shown.
Finish of by placing M8 Nut Caps (Item 13)
over the M8 Hex Bolts.
Using a tape measure, space the Brackets
accordingly to suite the length of the light
bar you will be fitting.
Fully tighten the LH and RH Front Mounting
Brackets to the Rack.
Refit the front right hand corner piece.
4MM
5MM
13MM